What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 00:13

This is 'the assistant's answer'
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
The other is “what does a “fuse” do?”
What should every American know before traveling to the UK?
the problem then depends on "how fast does the fuse operate?".
These devices are installed between the “hot” and “neutral” and protective ground.
At one ohm, the resistor has a maximum of 1 watt power.
Does the Lil Wayne song ‘Lollipop’ refers to a Lollipop sweet or a metaphor?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
what exactly is a ‘surge’ protector?
2024–10–14 [Omar Gharbi Omar Gharbi ]
Upvotes:
First Sentence:
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
What transforms the philosophical intellect?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
There are two important concepts here.
This device then solves the entire problem.
But it can get overloaded, and no longer works.
The MOV will conduct when the voltage exceeds 50% of line voltage.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Mission Control: Eye of the Storm - NASA (.gov)
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
An AC voltage/ current source, and an ac inductive load.
For this case there are devices called Metal oxide varistors (MOV).
Exercise improves colon cancer survival, high-quality trial finds - Ars Technica
(Dc diagram shown, AC is similar).
It seems Mohan does not understand the difference between a comment and an Answer.
[image of Common-mode choke]
How do military families balance personal political views with respect for civilian leadership?
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–10–16 [ OO OLAOYE OYEBODE ]
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
This one hit behind the barn.
Why Passing on Palantir Technologies Stock (PLTR) is a Big Mistake - Yahoo Finance
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Now when you have a certain ac resistance, then a current flows in a loop.
2024–10–10[John johnson John Johnson ]
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
DF Weekly: Why would Microsoft "sideline" its next generation handheld? - Eurogamer
nine
He then asserts :
There are three different concepts here that are getting confused.
Colorado has now recorded 10 measles cases this year as airport outbreak grows - GazetteXtra
Barnstars:
The third is lightning and “how it gets conducted into a home.”
It also is a device that limits the change in current flow.
Lululemon Stock Plummets 22% in Late Trading on Cut Guidance. Tariffs Are to Blame. - Barron's
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Here is a simplified AC power diagram.
so, what happens?
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
But… the neutral is now “floating” because of the 1 ohm resistance.
At least they know the answer if they wanted it.
These are simplified answers to the original question, and does not change anything I wrote above.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
I post the exact comment here.
Because the load is inductive, the current lags the voltage.(by a bit).
but I think this circuit , shows a few more pieces.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
a photo is worth a thousand words.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
A fuse is a non-resetable over current circuit protector.
but this device (an Inductor) … impedes the rapid changes in the current.
eight
What does a fuse do?
This is where the MOV conducts again, and dissipated the energy.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Edit 2024–10.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
In schematic diagrams this is the symbol for a fuse:
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
The bolt then partially travels down the line to your home.
A circuit breaker is similar, but is resettable.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
One is “what exactly is in a ‘surge protector’ ? ”
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
He then describes the function of a fuse.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
He then describes Rainy Season and Lightning.
One
So, the voltage could go up to 500 volts, and the fuse will not open up.
What is lightning?
[old diagram got deleted by accident]